Drywall Finishing & Repair Services

The first stage of our drywall services is to fix the hole or missing section of drywall. For smaller holes, nicks, and deep dents, we apply a self-adhesive mesh patch to shore up panel strength. Then, we use joint compound to further strengthen the correction.

Larger holes often require complete replacement of a portion of the drywall; we cut out both the broken section and a few inches clearance on either side. From there, we can cut and fit in a new section. We fill the edges using joint mesh tape to strengthen the bond and reduce the risk of cracks.

Sometimes, the repair section occurs at the corner of a wall or along an edge; this is most common where two walls meet. We use edge metals and joint compound to reconnect the edges and eliminate any cracking from shifting during cold and warm weather.

After the initial drywall repair service, we move on to the next step. First, we sand and even out the repaired section of wall.

Then, we apply a layer of drywall skim coat to seal in the surface. We then repeat this step two to three times. Why do we do this? It allows the wall to dry fully for up to 24 hours between each step.

The result is a flat, smooth wall with no imperfections or visible differences.

It might seem exhaustive to allow for so much time during your repair, but this is a critical step for the longevity of the surface.

Not only does it provide a better painting surface, but it also reduces the risk for your drywall to crack or break at weak points. This is important, especially in California.

The third stage in every repair is to apply texture to the wall. We use a highly-skilled exact-match technique to identify and match the texture on each repair section with the pre-existing texture on other surrounding walls.

Texture matching requires a high amount of skill and experience; it can be extremely difficult for the average DIYer to get it “right.”

That’s why we encourage all home and business owners in Camarillo, Thousand Oaks, and surrounding areas to contact us for help.

Our workers have extensive experience in drywall repair and painting, and know how to achieve the most flawless results despite the complexity of the job.

Results are virtually undetectable – even under close inspection.

The final steps of our drywall services including priming the surface using durable, long-lasting Sherwin Williams ProBlock Primer to effectively seal the surface.

Then, we add two coats of paint in your chosen color or style.

Want to maintain a cohesive look? We can match the current look and shade of surrounding walls.

Ready for a change? Ask us about combining repair with whole-room painting to rejuvenate and lift the appearance of your home from the inside out.

We also provide full-scale complete remodeling services to address your interior and exterior needs at the same time – this is perfect for people seeking a little bit of curb appeal.